Как чистить рабочие валики вручную?
To give the Tattoo RW a thorough cleaning, we recommend that you clean the card drive rollers in addition to the maintenance of the cleaning roller and printer interior.
- Check that your printer is switched on.
- Press the sides of the loader and remove it from the printer by lifting it out.
- Open the printer cover.
- Remove the front cleaning rollers.
- Locate the four drive rollers.
- Get a new cleaning card.
- With your left hand, push and hold down the push-button of the control panel.
- This will activate the rollers.
- To clean the rollers, place the cleaning card on each roller with your other hand.
- Feel free to use more than one card to completely clean the rollers.
- Once cleaning is done, put the cleaning roller back in, ensuring it is well in place.
- Close the printer cover.
- Put the card loader back into the printer until you hear the CLICK.