Как проводить плановую чистку принтера


Passing the adhesive card repeatedly through the printer cleans the cleaning roller. This removes any residual dust found on the front and back faces of the cards before they are introduced into the printer.


  1. Open the printer cover.

  2. Using the gauge, set the card thickness to the MAX position.

  3. Remove the ribbon from the printer if present.

  4. Close the cover and check it has clicked shut.

  5. Open the feeder and remove any cards present in the feeder.

  6. Close the feeder.

  7. Peel off the film from a new adhesive cleaning card supplied by Evolis.

  8. Double-click the control panel’s pushbutton.

  9. When the Card/ribbon LED on the control panel flashes, Insert the cleaning card in the manual feeder, adhesive face upwards. Cleaning starts.

  10. The used adhesive card is ejected automatically by the manual feeder.

  11. Put the ribbon back into the printer, then place some blank cards in the feeder and adjust the gauge to the appropriate card thickness.