Как напечатать пробную карту?

Printing a test card gives certain technical information about your printer. We advise you to print it when the printer is put into service and to keep it at hand.

  1. Make sure that a ribbon is installed in the printer and that a blank card is present in the feeder #1.
  2. Turn off the printer.
  3. Then, press the pushbutton on the control panel.
  4. Turn on the printer once again by holding down the pushbutton.
  5. The green warning light comes on.
  6. Release the button as soon as the green warning light flashes.
  7. After a few seconds, the test card is printed and is ejected in the reject box under output hopper #2.
  8. The card gives you information such as the model and the serial number of the printer.